How to protect a heat pump from freezing without glycol. Meet evoAFS

20.11.2026
Plum logo

If the power goes out in freezing weather, water in the outdoor section of a monobloc heat pump system can freeze and damage the heat exchanger. Plum developed evoAFS to reduce this risk by circulating water even during a power cut.

the limitations of glycol
and anti-freeze valves

Glycol and anti-freeze valves are commonly used to protect monobloc heat pumps from freezing. They work in different ways and have different maintenance requirements.

  • Glycol lowers the freezing point of the fluid in the system. Depending on its concentration, it can increase resistance to flow. There are also costs to consider, from buying the fluid to checking it periodically and replacing it when needed. Some systems also require a separate heat exchanger to isolate the glycol circuit from the rest of the installation.
  • Anti-freeze valves gradually release water from the system when its temperature falls below a set threshold. Once the valves have opened, the system may need to be topped up and bled.

Both options can protect the installation. The choice depends on how the heating system operates and what maintenance it will need over time.

evoAFS – active frost protection
for your heating system

evoAFS is an active antifreeze system designed for monobloc heat pumps. It helps protect the system if a power cut, equipment fault or flow problem interrupts normal circulation.

The system can run on water without glycol, avoiding the additional operating requirements that come with glycol mixtures.

What happens if the power
goes out in freezing weather?

A power cut in freezing weather is one of the main scenarios to consider when choosing frost protection for a heat pump.

If the power goes out on a freezing night, the mains-powered circulation pump stops and the water in the outdoor section of the system begins to cool.

evoAFS can continue to operate on its own battery. When it detects low temperatures, it switches to the appropriate mode and circulates water through the system. This reduces the risk of the heat exchanger freezing without having to drain the system.

When does evoAFS
start the pump?

The controller measures the outdoor air temperature and the water temperature. It uses these readings to select one of three operating modes.

  • Monitoring mode. When the outdoor temperature falls below 3°C, the pump runs periodically so the controller can check the water temperature. The colder it gets outside, the shorter the intervals between cycles.
  • Antifreeze mode. When the water temperature falls below 4°C, the pump circulates water until it reaches the set temperature.
  • Summer mode. The pump runs briefly once a day to prevent the impeller from seizing during long periods of inactivity.

How long
can evoAFS run during a power cut?

The 12 V, 18 Ah battery can power the module for:

up to 48 hours

at –25°C in antifreeze mode, with 10 minutes off and 3 minutes on per cycle.
up to 6 days

in monitoring mode, with 60 minutes off and 3 minutes on per cycle.
up to 17 hours

with the circulation pump running continuously.

These are maximum runtimes for a fully charged battery in good condition and a system with typical flow resistance. Actual runtime depends on operating conditions and system configuration. The effectiveness of frost protection also depends on how much heat is available in the system.

What
can you check remotely?

With the xCLOUD module connected, installers can check the water and outdoor air temperatures, see whether the pump is running and monitor the battery voltage. They can also adjust temperature thresholds and pump runtimes remotely. The controller uses LED codes to indicate issues such as a discharged battery or a faulty sensor.

With winter approaching, now is a good time to check how your heating system would cope if something went wrong. Reviewing frost protection before the first freeze gives you time to make any changes.

get in touch,
fill in the form below to contact us

    The administrator of your data is PLUM Sp. z o.o. with its registered office in Ignatki, ul. Wspólna 19, 16-001 Kleosin. Your data is processed in order to respond to inquiries made through the contact form or provided contact details, and to secure possible claims, which constitutes our legitimate interest. In the case where the notification is related to a contract we have with you, the purpose of processing your personal data is the execution of this contract. If you have given marketing consents, your data is additionally processed for the purpose of conducting marketing communication with you through your chosen communication channel. You have the right to request access to your personal data, their correction, deletion, or limitation of processing, as well as the right to object to the processing and to lodge a complaint with the supervisory authority. Detailed information concerning the processing of your personal data can be found HERE.

    I consent to the sending by PLUM Sp. z o.o. with its registered office in Ignatki, ul. Wspólna 19, 16-001 Kleosin (PLUM), to the phone number provided in the form, SMS/MMS messages containing commercial and marketing information regarding PLUM, including information on the range of activities of PLUM and products and services offered by PLUM, as well as promotions, also using automatic calling systems, which involves the use of telecommunication terminal equipment of which I am a user.

    I consent to the making of phone calls by PLUM Sp. z o.o. with its registered office in Ignatki, ul. Wspólna 19, 16-001 Kleosin (PLUM), to the phone number provided in the form for the purpose of conveying commercial and marketing information regarding PLUM, including commercial and marketing information about PLUM's activities and products and services offered by PLUM, also using automatic calling systems, which involves the use of telecommunication terminal equipment of which I am a user. .

    I consent to the sending by PLUM Sp. z o.o. with its registered office in Ignatki, ul. Wspólna 19, 16-001 Kleosin (PLUM), to the email address provided in the form, email messages containing commercial and marketing information regarding PLUM, including information on PLUM’s range of activities and products and services offered by PLUM, as well as promotions, which involves the use of telecommunication terminal equipment of which I am a user.